Lean Pipe And Joints

Product Details:

Owing to our in-depth industry experience and precise knowledge of this domain, we are offering an outstanding assortment of ABS Coated Galvanized Steel Lean Pipe.

Product Details:

MS Pipe with pe coated refers to Mild Steel Lean Pipe used n lean structure for industrial and domestic use.

Product Details:

Backed by years of industry experience, we are engaged in offering a premium quality range of HJ-1 Tee Joint.

Other Details:

• Compatible with 28 mm pipes
• Assembly required

Product Details:

The HJ-2 is a black metal joint set that allows you to create a three-pipe intersection or a corner. This joint set will probably be used for most of your structure's external corners and structural separations on two perpendicular sides. Other applications of the HJ-2 include the creation of more complex and ergonomic handles, the creation of V-shape racking support or a V-shape roof. It is often associated with the AI-CORNER accessory when positioning a surface on external sides.

Product Details:

The HJ-3 is a black metal joint set that allows you to create a four-pipe intersection or a corner. This joint set is excellent for making corner pegs at 90 degrees. It is also often used in the center of structures to create strong counterweight and in the bottom of structures to fix stem-mount casters.

To assemble an HJ-3 you need to combine two H-2 and an H-4 together with three M6-25B bolts and three M6-N nuts. This connector is a little bit trickier to assemble than the HJ-1 or HJ-2, but when fixing both H-2 parts together first, you should have an installed HJ-3 connector in no time.

Product Details:

The HJ-4 is a black metal joint set that allows you to create a three-pipe intersection on two axes. This joint set is the best option when you need to create separations without weakening the rigidity of your structure. It will give you the option of making a pipe grid, similar to welded wire mesh, but with fewer tubes than it would require with HJ-7 connectors. This HJ-4 will also be ideal when you need to create an intersection between two perpendicular pipes, but you don't want to weaken the strength of a long pipe or long pipe series. It allows you to secure stem-mount casters easily at the bottom of your structure.

To assemble an HJ-4 you need to combine two H-4 together with two M6-25B bolts and two M6-N nuts.

Product Details:

The HJ-5 is a black metal joint set that allows you to create a five-pipe intersection on three axes. This joint set is used in very specific situations such as the addition of a flag or for the installation of a caster right in the middle at the bottom of a structure.

To assemble an HJ-5 you need to combine four H-2 together with four M6-25B bolts and four M6-N nuts.

Product Details:

The HJ-6 is a black metal joint set that allows you to create a two-pipe intersection with an adjustable angle. This joint set is used in many applications to create an opening or bracing.

To assemble an HJ-6 you need to combine two H-5 and two H-6 together with two M6-25B bolts and two M6-N nuts.

Product Details:

The HJ-6A is a black metal joint set that allows you to create a two-pipe intersection with an adjustable angle up to 260 degrees. This joint set allows working with a wider angle radius than the HJ-6 allows. It can be used for many applications such as the creation of angular sides and top or V-shaped racks with angles wider than 90 degrees. The distance created between the two pipes is used for supporting pannels or manufacturing parts.

To assemble an HJ-6A you need to combine two H-6A and two H-6 together with two M6-25B bolts and two M6-N nuts.

Product Details:

The HJ-7 is a black metal joint set that allows you to create an intersection of two pipes, one above another. This joint set is mainly used to reinforce structures by building shelving supports, to strengthen the casters support, or to create a pipe grid, similar to a welded wire mesh.

To assemble an HJ-7 you need to combine two H-7 together with one M6-25B bolt and one M6-N nut.

Product Details:

The HJ-7A is a black metal joint set that allows you creating an intersection of two pipes, one above another. Very similar to the HJ-7, the only difference is that it is not completely closed. This connector allows the top tube to be in contact with a surface.

To assemble an HJ-7 you need to combine two H-7A together with one M6-25B bolt and one M6-N nut.

Product Details:

The HJ-8 is a black metal joint set that allows you to connect a surface to your structures, just like an anchor. This connector is designed to be attached to the edges of your surfaces and structures.

To assemble an HJ-8 you need to combine an H-8 and an H-9 together with one M6-25B bolt and one M6-N nut.

Product Details:

The HJ-9 is a black metal joint set that allows you to fix your structure to a surface. This connector is frequently used with workstations, but also to fix structures on the floor, on the wall or on the ceiling.

To assemble an HJ-9 you need to combine two H-9 together with one M6-25B bolt and one M6-N nut.

Product Details:

The HJ-12 is a black metal joint set that rotates 360 degrees. Very similar to the HJ-1, the HJ-12 allows a rotation once this connector is fixed.

To assemble an HJ-12 you need to put two H-12 together with a hinge bracket AP-HINGE, an M6-25B bolt and an M6-N nut.

Product Details:

The HJ-13 is a black metal joint set generally used to reinforce the structure's capacity.

To assemble an HJ-13 you need to put two H-13 together with an M6-25B bolt and an M6-N nut.

Assembly tip:

• This joint set is frequently used for the assembly of workstation, rack or cart requiring a high load capacity. For more information on the different ways to increase your structure's loading capacity, read our article How to calculate the loading capacity for modular structures.

Product Details:

The HJ-14 is a black metal joint set allows to create an intersection of three pipes with adjustable angle on each side of the cross tube.

To assemble an HJ-14 you need to put two H-14 with four H-6, four M6-25B bolts and four M6-N nuts. It is also possible to assemble the HJ-14 with four H-6A's.

Product Details:

The HJ-15 is a black metal joint set that connects a tube to a surface. If you want to create both an anchor and support, this joint set is your best option.

To assemble an HJ-15 you need to put an H-15 together with an H-16, an M6-12B bolt, and an M6-N nut.

Product Details:

The HJ-17 is a black metal joint set that allows you to create a two-pipe intersection with a 45-degree non-adjustable angle. This joint set is used for reinforcing structures. Unlike the HJ-6 / HJ-6A / HJ-14, the HJ-17 has nos adjustable angle. This feature makes it particularly useful for individual reinforcement situations.

To assemble an HJ-17 you need to combine an H-17 and an H-18 together with one M6-25B bolt and one M6-N nut.

Product Details:

The HJ-23 is a black metal joint set generally used to reinforce the structure's capacity. This joint set is very similar to the HJ-13, with the only difference that it includes a hinge bracket that allows it to rotate over an opening radius of almost 360 degrees, depending on your structure configuration.

To assemble an HJ-23 you need to put two H-23 together with an AP-HINGE hinge bracket, an M6-25B bolt and an M6-N nut.

Product Details:

The HJ-24 is a black metal joint set that allows you to create a swivel three-pipe intersection on two axes.

To assemble an HJ-24 you need to combine two H-24, an AP-HINGE hinge bracket, two M6-25B bolts and two M6-N nuts.

Technical Information:

• This joint set is designed with 8 striations for a better grip on the plastic coating of the 28 mm pipes.

Product Details:

The H-90 is a black metal joint set that allows you to connect two 28 mm pipes to create a 90-degree corner. This joint set is often used for ergonomic cart handles.

To assemble an H-90 you need to put two H-90 together with two M6-25B bolts and two M6-N nuts.

Product Details:

ESD metal conveyor frame with black plastic wheels. To minimize shipping costs and maximize maneuverability, this item is only available in 4 mtr (4000mm) long.

Roller track and its accessories will work on any 28mm pipe and joint systems. Some systems don't have the same conveyor size, so be sure to check the spec sheet to see if your old conveyor parts are compatible.

Product Details:

We are highly acclaimed in this industry for providing an optimum quality range of ABS Coated Lean Pipe.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2-3 days

Product Details:

To cater the variegated needs of our esteemed customers, we are highly engaged in offering a wide array of PE Coated Galvanized Steel Pipe.

Product Details:

Being a foremost organization in this industry, we are actively engaged in offering the finest quality range of SS304 Lean Pipe.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2-3 Days